FEC Safety and Equipment Guide

What Are the Main Family Entertainment Center Safety Risks?

Mixed-Age Play

The biggest risk in a Family Entertainment Center is children of different age groups playing together. Children are easily knocked down by older children, and older children don't like to play with younger children.

High-Activity Equipment

High‑activity equipment such as trampolines and climbing structures feature fast‑paced movements and represent high‑incident zones within Family Entertainment Centers.

Circulation and Supervision

Pedestrian flow routes shall be reasonably planned. Otherwise, overcrowding and collisions among visitors may occur. Excessive blind spots for staff will also make supervision difficult and lead to frequent accidents.

How Should FEC Equipment Be Selected for Safety?

Match Equipment to User Age

Equipment should be matched according to age groups. Soft, injury‑resistant play equipment shall be adopted for the junior‑age zone, while more challenging amusement attractions can be installed for the older‑age zone.

Choose Commercial Playground Equipment

FECs shall select Commercial Playground Equipment, which delivers superior structural strength, higher load‑bearing capacity, and better wear resistance to withstand long‑term high‑frequency usage.

Check Materials and Documentation

The basic materials of Commercial Playground Equipment shall include hot‑dip galvanized steel frames, flame‑retardant soft padding, and anti‑slip floor mats. Meanwhile, qualified documents such as ASTM F1918 or EN 1176 safety standard certificates shall be obtained from suppliers.

How Does FEC Layout Affect Equipment Safety?

Age and Activity Zoning

Use colors to achieve zone division, so that children of different age groups can play separately. Meanwhile, arrange the junior‑age zone, family leisure zone, and high‑challenge zone in separate layouts.

Clear Staff Sightlines

Staff observation visibility shall be taken into account during equipment layout. For areas with sight obstructions, increase patrol personnel or install surveillance cameras.

Entry, Exit and Circulation

Separate entrances and exits should be installed, and each play zone shall be equipped with two exits to enable rapid crowd evacuation.

What Should Be Checked After FEC Safety and Equipment Installation?

Structure and Fasteners

Inspect the stability of the overall structure, ensure all connection points are firm and reliable, and complete load‑bearing tests as required.

Padding and Netting

Protective padding shall be wrapped around all hard corners and upright columns. Safety nets must remain intact with no damage, and their mesh sizes shall comply with specifications.

Flooring and Clearances

Check the fall‑height of safety floor padding, verify equipment‑to‑equipment spacing, and confirm the clearances between equipment and walls as well as ceilings.